Sealants and Compounds | Fasteners and Rivets | Cleaning Chemicals and Degreasers | Non-destructive Testing Supplies
Fuel system chemicals, also known as fuel additives, are substances added to gasoline or diesel fuel to improve engine performance, reduce harmful emissions, and clean the fuel system.
PRIST Hi-Flash anti-icing aviation fuel additive (MIL-DTL-85470) is a safe, easy-to-handle aviation chemical capable of protecting your aircraft’s fuel system from debilitating and dangerous ice crystals. PRIST Hi-Flash meets the rigorous demands of turbine aircraft use. Best of all, our entire lineup of PRIST fuel additives are less toxic, less volatile, and much easier to use than conventional additives.
Corrosion prevention protective coatings are materials applied to surfaces to create a barrier that shields the underlying material from corrosive elements like moisture, oxygen, and chemicals, thus slowing down or preventing the corrosion process.
Tectyl™ 502-C 9 (MIL-C-16173E) is a solvent-cutback, soft wax-based corrosion preventive compound designed to protect ferrous and non-ferrous metal surfaces from rust and corrosion. It provides long-lasting protection during indoor storage, covered storage, and shipment.
Tectyl™ 502-C 9 (MIL-C-16173E) 0is a solvent-cutback, soft wax-based corrosion preventive compound designed to protect ferrous and non-ferrous metal surfaces from rust and corrosion. It provides long-lasting protection during indoor storage, covered storage, and shipment.
Sealants and adhesives are specialized materials essential for structural integrity, leak prevention, and durability, bonding components like panels, frames, and joints, and protecting against environmental elements and extreme conditions
LOCTITE® EA 9321 AERO is a 2-part thixotropic epoxy paste, which exhibits toughness and retains strength at elevated temperatures. Designed for potting and edge fill to use with various substrates, it comes in ready-to-use packaging configurations for OEM and MRO customers. This product cures at room temperature and yields durable bonds over a wide temperature range.
LOCTITE® EA 9394 AERO is a 2-part, structural adhesive paste possessing excellent strength to 177°C (350°F), room temperature cure, excellent mechanical properties, and low toxicity. It is also a good gap filler and has improved hot / wet properties. It’s qualified to MMM-A-132 and by many OEMs.
Henkel Loctite EA 9396 AERO is a two component, low viscosity, room temperature curing epoxy paste adhesive that possesses excellent strength properties at temperatures from -55 to 177 °C. 1 qt Kit.
LOCTITE® EA 934NA AERO is a two-component thixotropic paste adhesive, which cures at room temperature and possesses superior strength to 300°F/149°C and higher. Its thixotropic nature and good compressive strength make it ideal for potting, filling and fairing, as well as for shim applications. LOCTITE EA 934NA AERO is qualified to MMM-A-132 Type 1, Class 3 with a room temperature cure.
3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a non-sag, tough, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.
Our 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is a flexible, two-part, room-temperature curing epoxy adhesive that provides high shear and peel strength, making this an ideal adhesive for the most demanding aerospace applications. It maintains bond strength at low temperatures and stands up to challenging environmental conditions.
Our 3M™ Scotch-Weld™ Epoxy Adhesive EC-3333 B/A is a tough, two-part, room-temperature curing epoxy adhesive that provides high shear and peel strength, making this an ideal adhesive for the most demanding aerospace applications. It maintains bond strength at low and elevated temperatures and stands up to challenging environments, including hot wet conditions.
3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323 B/A is a two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP. Once cured it provides extremely high shear and peel strength over a wide temperature range, with outstanding resistance to harsh environments and chemicals commonly encountered in aerospace applications.
3M™ Aerospace Sealant AC-251 is our two-part, manganese dioxide cured, polysulfide based sealant for aircraft windshields, canopies and windows. This quick curing product is easy to tool, and the non-sag formula holds its shape on vertical and horizontal surfaces. AC-251 is effective for acrylic, glass, and polycarbonate aircraft transparencies and exterior mold line applications.
3M™ Aerospace Sealant AC-770 is a family of Class B, manganese dioxide cured polysulfide sealants formulated for easy tooling. Their fast cure time and low density contribute to faster process times and lighter aircraft. These two-component sealants have outstanding resistance to jet fuel, chemicals and petroleum products common throughout the aerospace industry.
PR-1440 Class A – B are an aircraft integral fuel tank sealant. It has service temperature range from -65°F (-54°C) to 250°F (121°C), with this intermittent excursions up to 275° (135°C). This material is designed for brush sealing of fasteners in fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.
PR-1440 Class A -B are a two-part, manganese dioxide cured polysulfide compound. The uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates.
PR-1422 Class A – B are an aircraft integral fuel tank sealant. It has a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for brush sealing of fasteners in fuel tanks and other aircraft fuselage sealing applications. The cured sealant maintains excellent elastomeric proper- ties after prolonged exposure to both jet fuel and avi- ation gas. PR-1422 Class A is a two-part, dichromate cured polysulfide compound. The uncured material is suit- able for application by brush in thickness up to 25 mils. It cures at room temperature to form a resilient sealant having excellent adhesion to common air- craft substrates.
The following tests are in accordance with AMS-S- 8802 Class A specification test methods.
Your aircraft faces corrosion from a lot of different sources, including its critical fluids and fuels. Help guard against corrosion by ordering Flamemaster CS-3213 B-1/2 Corrosion Inhibitive Sealant (MIL-PRF-81733D) from Favia International. The fuel-resistant formula goes on quickly and cures readily to form an impenetrable barrier against moisture and jet fuels, keeping your aircraft’s sensitive components safe. The corrosion-inhibitive sealant is long-lasting and delivers continuous protection flight after flight.
Flamemaster CS-3213 B-1/2 Corrosion Inhibitive Sealant from Favia International is easy to apply and goes on smoothly forming a fast, resilient seal that keeps out moisture and easily withstands the rigors of flight. The high-quality sealant can be applied virtually anywhere on the aircraft, offering superior performance in any condition. The MIL-PRF-81733D Type 2, Class 1, Grade A Spec sealant is sold in a two-part kit with enough material to make one pint (12 fl. oz.) of sealant. Order a single kit or buy in bulk and save when you shop at Favia International.
Cleaning and Degreasing agents are crucial for maintaining aircraft safety and performance, with products like degreasers, alkaline cleaners, and solvent cleaners used to remove grease, oil, and other contaminants.
The ZOK 27 gas turbine compressor and gas path cleaner features a water-based, biodegradable formula that acts as both a cleaner and corrosion inhibitor. Its unique design allows engines to be washed and protected, enabling an immediate start without requiring a rinse beforehand.
This is originally developed for the UK Ministry of Defence, it is now widely used across various industries, including aviation, marine, power generation, oil and gas, and industrial sectors.
The effectiveness and duration of corrosion inhibition depend on environmental conditions. However, it can be easily restored with a simple engine wash no demineralized water rinse needed.
ZOK 27 is available in both concentrate and ready-to-use forms.
Magkleen 4 is a colorless solvent blend intended for use by spray or immersion, to remove oil and grease from bare or painted surfaces.
Ardrox 185L (SAE ARP 1755B) is a highly alkaline concentrated solution in water containing sequestrants. It is also available as a powder under the name Ardox 185.
Ardox 185L is primary intended for the removal of heavy rust and scale from ferrous components in immersion tanks but it is also capable to remove oil, grease and some air-dried paints. It will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.
When used in conjunction with the adequate other Ardox specialties, Ardox 185L can be used to remove scale from hot-end jet engine components. It can also be cleaning parts of titanium.
